WIFI camera with battery and magnet, with charging-adapter
382,60 € excl. VAT
WIFI camera with battery and magnet, without charging adapter, 673 001 0024
Available for pre-order
WiFi reversing camera with rechargeable battery and magnetic mount
The WiFi reversing camera with built-in rechargeable battery and magnetic mount allows for flexible vehicle monitoring without the need for complicated wiring or an additional monitor. The camera feed is transmitted directly via Wi-Fi to a compatible display.
Thanks to the magnetic mount, the camera can be fitted quickly and without tools, and used flexibly on a variety of vehicles.
With a battery life of up to 12 hours in daylight, an integrated night vision function and a robust, water- and dust-resistant design (IP69K), it is ideal for use on lorries, trailers, cranes and other commercial vehicles.
Compatible with display:
673 002 0004 7″ WiFi waterproof display without touchscreen
673 002 0005 7″ WiFi waterproof display with touchscreen
| Weight | 0,773 kg |
|---|
Battery Capacity: 3.6 V / 6,400 mAh
Charging Voltage: 5–12 V
Charging Time: 5 V / 8 h, 12 V / 3 h
Charging Current: 5 V / 1.5 A (max.), 12 V / 1.5 A (max.)
Discharging Time: 12 h (daytime), 5 h (nighttime)
Charging Temperature: 0 to +40 °C
Discharging Temperature: −20 to +60 °C
Storage Temperature: −20 to +60 °C
Protection Rating: IP69K
Dimensions: 116 × 80 × 66 mm
Weight: 670 g
Image Sensor: 1/2.9″ CMOS
Resolution: 1920 × 1080 pixels
Automatic Gain Control (AGC): Auto
Signal-to-Noise Ratio: 38 dB
White Balance: Auto
Backlight Compensation (BLC): Auto
Operating Frequency: 2048–2478 MHz
Transmission Distance (unobstructed): 300 m (20 dBm)
Receiving Sensitivity: −78 dBm
Video Compression: H.264
Transmission Power: 10 / 20 / 16 dBm
Modulation: FHSS
Latency: 170 ms
RF Bit Rate: 12 Mbps
Minimum Illumination: 0 Lux
Night Vision Distance: 8–10 m
Audio: Optional
Viewing Angle: 70° / 100° / 110° / 130°
IR-Cut Function: Optional
Wall Socket Charging Adapter: Included







